Every dough ball on every tray is now verified inline at production speed for position, size and tray cleanliness, with the image and result kept for each tray
100%
of trays inspected inline at production speed
50%
reduction in inspection resource
3
checks on every tray: foreign body, size and position
The Domino's Pizza supply chain centre in Warrington produces fresh dough and supplies stores with the ingredients and products they need to serve customers every day. The quality and consistency of that dough directly support the pizzas prepared in store and the experience customers expect from Domino's.
Domino's achieved 100% inspection with the OAL Connected platform, integrating 2D and 3D vision inspection across production lines. The result is inspection at the scale of the operation rather than the scale of a sample. It supports Domino's commitment to Right First Time, gives the technical team evidence they can stand behind during investigation and audit, and builds a long-term dataset to help refine manufacturing controls.
Live inspection on the OAL Line Terminal at Warrington, showing each tray's result as it passes.
The 3D inspection head mounted over the tray conveyor, measuring every dough ball as trays pass at line speed.
The challenge
Domino's commitment to Right First Time means delivering consistent, in-specification dough to its stores. Behind that commitment is a high-volume operation processing hundreds of thousands of reusable trays each week.
At this scale, foreign bodies, dimensional deviations or incorrectly positioned dough balls can affect downstream handling, store consistency and the customer experience.
Domino's wanted inline verification of every tray: the same repeatable checks applied on the line itself at production speed, with evidence retained against each tray, so the team could demonstrate control calmly and release people for higher-value quality work.
The solution: OAL Vision on the Connected platform
The checks
OAL Vision carries out three checks inline, on the production line itself. They are OAL's standard vision checks, configured for dough and delivered turnkey with the 2D and 3D cameras and lighting they run on:
Foreign body detection identifies unexpected material on the tray before dough is deposited.
Dimensional inspection measures each dough ball against specification.
Position checking identifies misplaced or touching dough balls before proving.
Every check runs on 100% of trays, with no product taken off the line, and its decision and image are recorded against the individual tray number.
The platform
The checks run on OAL Connected, which provides three things:
Software and database that hold every inspection result and image against its tray number, giving one record of what was checked and what was found.
A reporting module that turns those records into reports and trends for the quality and production teams.
A line control module that connects inspection to the line, with results shown to operators on the OAL Line Terminal as each tray passes.
This gives Domino's one supplier, one support relationship and one view of the data. On the same foundation, Domino's can add further Connected modules such as printer control and packaging verification, OAL robotics, deeper machine integration for process optimisation and further lines or sites.
Built for the natural variation of dough
Dough is not a fixed product. It changes with flour distribution, temperature, proving state, texture and shape. The modules needed to tell meaningful defects from acceptable variation without creating unnecessary rejects or missing the issues that matter.
OAL trained the models on imagery from Domino's live process: real trays, real residue and real dough under factory lighting. This lets the system accommodate normal variation while staying sensitive to the defects that matter operationally, and it is the same approach OAL uses to configure its vision modules for other food products.
Delivery was turnkey. OAL brought vision engineering, software, controls and mechanical design into one team, so optics, lighting, image timing, model behaviour, line control and the operator interface arrived as one working system rather than a set of parts for Domino's to integrate.
A 3D view of a tray in the OAL Vision interface. Each dough ball is located and measured, with a running pass and reject count for the line.
From inspection evidence to process insight
Every tray now carries a record of what was checked and what was found. For the quality team, that means an investigation starts from evidence rather than reconstruction, and an audit question about a given batch has a documented answer.
The same records build into a long-term dataset. Over time it helps the team understand seasonal trends and refine manufacturing controls, and inspection trends point to where a process needs attention: tray contamination can indicate wash performance, dimensional drift can suggest depositor calibration, and positional errors can highlight deposit timing.
Retained images also make defect detection sharper over time. When natural variation shifts or a new type of defect appears, the stored images are used to retrain the models, so the foreign body, dimensional and position checks keep catching the defects that matter without raising false rejects. This combination of inspecting every unit and linking the result to its identity is the same principle that underpins OAL Connected, and it applies to any high-volume food process where sampling currently forms part of the quality regime.
The results
The system strengthens Domino's Right First Time approach and gives the technical team confidence that nothing has been missed. Benefits include:
100% inline verification, with the same repeatable checks on every tray at production speed.
Tray-level evidence for investigation, audit and continuous improvement, retained against each tray number.
Earlier identification of foreign bodies, dimensional deviations and positioning issues, reducing exposure to dough-ball rejections and recalls.
A 50% reduction in inspection resource, releasing people from repetitive checks for higher value quality and production work.
A platform to build on, to add more inspections, automation, robotics and deeper machine integration.
The OAL Line Terminal on the Warrington line.
The customer perspective
“At Domino's Warrington, we were looking for a solution that would provide automated monitoring of dough-ball placement while giving us deeper insight into our production process. OAL's vision system allows us to monitor dough-ball positioning, tray cleanliness, and product dimensions in real time, helping us identify process variation before it becomes a quality issue.
The system has also enabled us to build a valuable long-term dataset, allowing us to understand seasonal trends and continuously refine our manufacturing controls. By reducing manual inspection requirements and improving our vision on every product we produce, we have achieved significant benefits in both operational efficiency and product quality.”
Chris Shepherd, Director of Supply Chain Improvement Projects, Domino's Pizza
Inspection you can stand behind
If quality is a priority on your own automation journey, OAL can help you adopt the right vision and software technologies for your process, from inline inspection of every unit to the platform that records, reports on and acts on the results.
If you would like to talk through an inspection challenge on your own line, the OAL team is happy to have that conversation in confidence. There is no obligation and no sales pitch, just practical experience from live food environments.